How To Measure

Measure the grinder’s feet, not just its body.
Measure from the outside edge of the left foot to the outside edge of the right foot. Then measure from the front edge of the front feet to the back edge of the rear feet. Every foot must sit completely within the drawer-top measurements shown below.

Drawer and size	Drawer top (W × D)	Height	Overall depth including handle	Capacity Load
Pro Cub — Small	140 × 240mm	55mm	290mm	25kg
Pro Cub — Large	200 × 300mm	55mm	350mm	25kg
Grounds Cub — Small	140 × 240mm	55mm	N/A	25kg
Grounds Cub — Large	200 × 300mm	55mm	N/A	25kg
Grounds Control — Small	160 x 250mm	85mm	300mm	35kg
Grounds Control — Medium	210 x 300mm	80mm	350mm	50kg
Grounds Control — Large	280 x 370mm	100mm	420mm	50kg
Double Drawer — Small	355 x 375mm	85mm	390mm	50kg
Double Drawer — Medium	385 x 375mm	85mm	390mm	50kg
Double Drawer — Large	450 x 435mm	85mm	450mm	50kg

 

If both measurements fit within the drawer-top dimensions, your grinder’s feet should be properly supported.